MDA-550/MDA-510
Users Manual
24
When the test tool is turned off, an active Report is closed
automatically.
For copying or deleting stored reports:
1. Push
.
2.
FILE OPTIONS
.
3. Use
to highlight
COPY
to copy to USB, MOVE
to USB and delete,
RENAME
to rename the report
name or
DELETE
to delete the report.
4. Push
.
5. Use
to highlight the report.
6. Push
to confirm.
Successive saved screens are represented by the last 2
digits in the filename. As an example, when
SAVE TO
REPORT
is selected for the second time in the Motor Drive
Output, Voltage Modulation, Phase-Phase mode, the
filename is OUVMPP02.PNG.
Table 2 shows the filenames that correspond to the
selected function.
FlukeView 2
Refer to the section
Connecting to a Computer
in the
Fluke
190 Series II Users Manual
for information about how to
connect the USB cable to a computer.
The setup program of the
FlukeView 2 for ScopeMeter Test
Tools
is available on the USB drive included with the
Product.
After installation:
1. Start the FlukeView 2 software.
2. Push
HELP
to access the documentation for the
program.
SAVE
ENTER
ENTER
