Fluke 2680A Скачать руководство пользователя страница 131

Страница: 131 / 274

Using Fluke DAQ Software

Managing Your Network Using Fluke DAQ

3-33

Starting an Instrument Scan

To start an instrument scan

Click the

on the Fluke DAQ toolbar and highlight a instrument in the

TreeView panel.

Click

to start the scan. Click

to stop the scan.

alg122s.bmp

Getting Scan Data

Click the

button to retrieve any scans in the instrument’s memory. The

scan data is retrieved and logged into the history database where it can be viewed

in the Trend window and exported if desired.
If scanning is started from Fluke DAQ, the software automatically retrieves the

scan data and logs it in the history database until scanning is stopped or until the

software stops running. There is no need to retrieve the scan data manually.

However, if scanning is started from the 2680A or 2686A front panel or if

scanning continues after the software or computer is shut down, the scan data is

stored in the instrument’s internal scan queue memory. Get Scan can be used in

these cases to retrieve scan data from the instrument and clear it from memory.

Содержание 2680A



















































































































































































































































































Результаты поиска

Содержание 2680A

Отзывы:

Fluke 2680A, Руководство пользователя, Страница: 131 / 274

Результаты поиска

Содержание 2680A

Отзывы: