fluidra 74139, Руководство пользователя

Страница: 26 / 252

22
(8) How to check the parameters?
Press button ,then press to check the parameter of B - C - D - E- F- G .
Code Parameter Range
B Water in temperature
-9 to 99
℃
C Water out Temperature
-9 to 99
℃
D Heating pipe temperature
-29 to 99
℃
E Gas return temperature
-29 to 99
℃
F Ambient temperature
-29 to 99
℃
H Actual steps of Electronic expansion valve N*5
** ATTENTION **
When you press and press button to enter into parameter checking , the button could not be operated.
At the same as above ,when you press and press button to check TIME - starting time of TIMER and Stopping time
of TIMER ,the could be not operated.
（
9
）
Parameter setting
This part should be operated only by qualified technicians for after-service or maintenance.
(1) Press + + at same time in 5 second, display flashes ,
(2) Press or to choose the parameter you want to adjust
(3) Press again to enter into interface
(4) Press or to adjust the value setting.
(5) Finally press once again to save the data or press to save and quick-exit the parameter setting .
Parameter
Meaning Range Default Remarks
1
To set the entering water
temp. under heating mode
15-42°C 28°C Adjustable
2
Entry into defrosting time
period
30-90MIN 40MIN Adjustable
3
Terms of Entry defrosting
function
-30°C to0°C -7°C Adjustable
4 Terms of Exit defrosting 2 to 30°C 20°C Adjustable
5 Time of Exit defrosting 1 to 12MIN 12MIN Adjustable
6 Mode: 0 Heat 0 0 Not adjustable
7
Mode selection of Electronic
expansion valve
0-1 1(auto) Adjustable
A
Manual adjustment steps of
electronic expansion valve
18-94 70 Adjustable
L
Entering water temperature
calibration
-9.9-9.9 0
Adjustable
Recover to Factory default setting
Long press and simultaneously in 10 second to recover to factory default setting ,it will display “0000”
and then back to “OFF”.