fluidra 74139, Руководство пользователя

Страница: 25 / 252

21
6.Operation
(1) Guide for operation
(2) Start the pool heat pump
Press to start the heat pump, the LED display will show the inlet water temperature and current working mode after 5s.
(3) Stop the pool heat pump
Press once again to stop the heat pump, the LED display shows ‘OFF’
(4) Water temperature setting
Press or to set the desired water in temperature in current working mode, then Press to save setting and exit.
(5) TIME setting
Press button ,then press to enter into “ TIME “ display ;
** HOUR SETTING**
Press again to “HOUR” setting , “HH” flashed ,then press or to adjust the HOUR from 0 to 23 ;
**MINUTE SETTING**
Press to enter into MINUTE setting ,”MM” flashed , then press or to adjust the MINUTE from 0 to 59.
(6) TIMER ON Setting
Press button ,then press button twice to enter into TIMER ON setting .When you see the starting time displaying
on controller ,Press to confirm to enter into TIMER ON setting interface , finally press or to adjust the starting
time.
(7) TIMER OFF Setting
Press button ,then press button 3 times to enter into “ TIME OFF” setting . When you see the stopping time
displaying on controller ,Press to confirm to enter into TIMER OFF setting interface , finally press or to adjust
the stopping time .
**Above operations, you could press button to save the setting and quick-exit the program. **