FLENDER K.A Series, Руководство по эксплуатации

Страница: 33 / 128

Further information
Additional information such as connection dimensions and a detailed illustrated description of
the gear unit and the oil supply system with water-oil cooler can be found in the dimension
drawing in the complete gear unit documentation.
Additional information about the oil supply system, control notes, the required cooling water
quantity and the maximum permissible water intake temperature can be found in the separate
data sheet, in the list of equipment and in the oil supply system operating instructions provided
in the complete gear unit documentation.
3.7.3.3 Pump
Requirements placed on the medium being pumped
The pump being used is suitable for pumping lubricating oil. It is not permissible that the oil
contains abrasive components and must not chemically attack the materials used in the pump.
Clean oil with good lubricating properties is a precondition for ensuring the correct function,
high operational reliability and long service life of the pump.
3.7.3.4 Oil filter
Introduction
The oil filter protects downstream units, measuring and control devices against dirt and
pollution.
Principle of operation
The oil filter comprises a housing with connections and a filter cartridge. The medium flows
through the filter housing, where, depending on the filter gauge, most of the dirt particles larger
than a defined size in the oil are filtered out. Dirty filter cartridges must be cleaned or replaced.
3.7.4 Separate oil supply system
A separate oil supply system can be used for cooling the oil.
Further information
Further information about separate oil supply systems can be found in the oil supply system
operating instructions in the complete documentation for the gear unit.
You can find additional information about the components of the oil supply system in the
operating instructions for the components in the complete gear unit documentation.
Description
3.7 Cooling
REDUREX Gear unit 5200en
Operating Instructions 03/2019
33