Flavor Burst CTP 80SNS-L, Оборудование, техническое обслуживание и эксплуатация: Руководство

Страница: 34 / 75

33
3. The empty flavor will show a red status bar
and low percentage remaining. Touch the
CHANGE SYRUP button for this flavor.
If any bags show near empty, consult with a
store supervisor or manager to decide if the
flavor should be replaced.
4. The screen will show instructions. Follow
these instructions to locate the tray with the
empty bag. Stay on this screen.
NOTE: DO NOT PRESS “NEXT” UNTIL A
NEW BAG OF SYRUP IS INSTALLED. IF
YOU ACCIDENTLY GO TO THE NEXT
SCREEN, CHOOSE THE BOTTOM BUTTON
TO CONFIRM THAT THE SYRUP BAG HAS
NOT BEEN REPLACED YET.
5. With a paper towel under the connection,
disconnect the syrup bag from the syrup
connector.
6. Remove the tray with the empty bag from
the cabinet.
7. Select a new flavor bag and remove the
dust cap. Ensure that the flavor is the
SAME FLAVOR as the empty one.
8. Place the bag into the tray and ensure the
bag fitment is accessible through the tray
slot.
9. Settle the bag into the tray and return it to
the cabinet.