Flavor Burst CTP 80SNS-L, Оборудование, техническое обслуживание и эксплуатация: Руководство

Страница: 12 / 75

11
Door Facade Assembly – Exterior Features (See Figure 3A)
ITEM PART NO. DESCRIPTION QTY. FUNCTION
1
N/A
INTERNAL DOOR ASSEMBLY
FEATURES
1 See Figure 3B
2
MIS 3516A SNS LID COVER ASSEMBLY 1 Protects the top of the Door Assembly.
2A
MIS 3516 SNS LID COVER BLACK 1 Protects the top of the Door Assembly.
2B
MIS 3521A
SNS LID BRACKET FRONT
LATCHING
1
Depresses the micro switch, signaling the lid
is in place on the Door Assembly.
2C
MIS 3521 SNS LID BRACKET 2 Allow the lid to rest on top of the door façade.
2D
FAS 2018 CLAMPING KNOB WASHERS 2 Creates space between the lid and bracket.
2E
FAS 2024 8
-
32 X 1/4 PAN HEAD SCREW 4 Attaches brackets to lid cover.
2F
FAS 2014 8 - 32 X 1/2" PAN HEAD SCREW 2 Attaches bracket to lid cover.
3
MIS 3525R SNS FACADE FACE RIGHT 1
RIGHT ASSEMBLY INSTALL: Main outer
panel of “right” Door Assembly.
3
MIS 3525L SNS FACADE FACE LEFT 1
LEFT ASSEMBLY INSTALL: Main outer
panel of “left” Door Assembly.
4
ELE 906SNS F10 DRIVER BOARD CTP - SNS 1 Flavor Burst unit command center.
5
MIS 3526 FACADE CTP MOUNT SNS 1 Mounts Touch Panel to front of Door panel.
6
MIS 3150 FLAVOR BURST LOGO DECAL 1 Displays Flavor Burst trademark logo.
7
MIS 3528
3.5 MM MALE - MALE CABLE 26"
SNS
1
Electronically connects Touch Panel to
freezer.
8 ELE 427SNS MICRO SWITCH CABLE - SNS 1
Electronically connects the micro switch of
the lid to the Touch Panel.
9
ELE 462 V7 - 3S17D8 - 022 MICRO SWITCH SNS 1
Signals the Touch Panel whether or not the
lid is in place.
10
FAS 2140 4
-
40 x 5/8" PHILLIPS PH S.S. SCREW 2 Fastens the micro switch to the Door panel.
11
MIS 3210 1" OPEN CLOSE BUSHING 1
Protects the Touch Panel cables around the
Door panel opening.
12
MIS 3518 HEYCO 246 2" HOLE BUSHING 1
Protects the Touch Panel cables and tubes
around the Door panel opening.
13
FAS 2136 10
-
32 TWO PIECE HEX CAPNUTS 14 Caps the ends of various screws.
14 FAS 2064 10 - 32 X 3/8 S.S. PHLP PH M/SCREW 14 Attaches brackets and hinges to Door panel.
15
FAS 2139 M4 x 6 PHILLIPS PH S.S. SCREW 4 Attaches mounting bracket to Touch Panel.
16 FAS 2177 10 - 32 NYLON LOCK NUT ST/ST 4 Locks and protects the ends of screws.
17
FAS 2007
MOTOR MOUNTING HOUSING
SCREW
2 Attaches upper frame to Door panel.
18
MIS 3502 S3822
-
0100 HINGE SNS 2
Allows the Door Assembly to swing open
away from freezer door.
19 MIS 3508 HINGE SPACERS BLACK SNS 1 Provides more depth to the latch.
20
MIS 3501 S3824 - 1075 HINGES SNS (2pc) 1 Locks Door Assembly against the freezer.
21 FAS 2022 8 - 18 X 1/2 PAN HEAD - SELF DRILL 7
LEFT ASSEMBLY INSTALL: Attaches door
latch and tube rail to freezer where pre-
drilled holes are not available.
22 MIS 3517 DETENT PIN 1/4 x 3/4 SS316PL 1 Locks the two Door Assembly latch pieces.
23
MIS 3527 12" STAINLESS TETHER WIRE SNS 1 Keeps the detent pin tethered to the latch.