Flash Technology VANGUARD FTS 370d, Справочное руководство

Страница: 93 / 118

FTS 370d/w/r Revision 10 – 1/09/2015 81
Component Removal and
Replacement
Note the location and color of all wires
that you disconnect when troubleshooting
or replacing components. Verify that the
wiring agrees with the applicable figure in
Section 2 after testing or replacing any
component.
Important! Review the Safety
information at the beginning of
Section 5 before removing or
replacing any component.
The general procedures for removing
components with power disconnected are
as follows:
1. Obtain access to the component in
question.
2. Completely remove or relocate these
components.
3. Disconnect the wiring to the
component that you want to replace.
4. Remove the component.
5. Replace everything in the reverse
order: first the component, then the
wiring. In some cases, you may have
to place some wires on the component
before you fasten it in place, then
replace the remaining wires.