Flash Technology VANGUARD FTS 370d, Справочное руководство

Страница: 18 / 118

6 Revision 10 – 1/09/2015 FTS 370d/w/r
Note: Manual override can only be activated by the unit programmed as System 1. The
Manual Mode switch is disabled in subordinate units.
PCB1 Information Display and User Interface
A multi-line OLED (Organic Light-
Emitting Diode) display provides system
status,
alarm and programming
information. Three pushbuttons located to
the immediate right of the display provide
the user interface for the system. The top
and bottom buttons move the cursor
position (*) up and down on the display.
The center button selects the action at the
cursor position. The information display
defaults to show the current system status
as well as the basic configuration for the
unit.
See Section 3 for a detailed
description for all menu functions of the
information display. See Table 3-3 for a
complete list of alarms provided by the
information display.
Figure 1-3 – Information Display and User Interface
Manual Override
The Manual Mode
switch provides
temporary control of the
system’s
operating
mode. When the manual
mode switch of the unit
programmed as System 1
is moved to either MAN DAY or MAN
NIGHT, the display reads “M-DAY” or
“M-NIGHT”
respectively and the
corresponding Mode LED blinks. Manual
mode expires 30 minutes after initiating
the mode override. Each change to the
manual mode switch restarts the 30 minute
timer. The Manual Mode switch must be
moved after power up to activate mode
override. The switch has no effect if it is
set to Day or Night before power up.
Status and Alarm LEDs
Twelve Status and Alarm LEDs are
provided for immediate visual reference of
the current status of the unit. Table 1-3
describes the function of each LED.