7
OWNER’S MANUAL
NEUTON™
• The pump, water temperature sensor, control valves, associated electrical and controls are all factory wired
and tested
• Only field connections required are main power (208/230/1Ph), zone sensor, and BAS (if used)
• On-board controls specifically developed and optimized for chilled beam zone control (plug and play)
• All pipe connections use swivel half-union adapters with face gasket designed to easily connect to standard
1” male fittings
BAS
Communications Link
(field wiring by contractor)
18-4 Plenum
Cable
(field wiring by
contractor)
Main Power Connection
(field wiring by contractor)
