Fisher & Paykel RX256DT4X1, Руководство по обслуживанию

Страница: 44 / 108

321023
44
8.1.4.17 Service Test 173 - Ambient Light Test.
This test is used to test the Auto Light feature. When selected, the refrigerator display will show “Lo” or
“hi” depending on the ambient light sensed by the light sensor. A service technician should evaluate
the proper operation of the ambient light by covering the light sensor for approximately 10 seconds
and verify a “Lo” on the display.
LOW AMBIENT LIGHT
HIGH AMBIENT LIGHT
8.1.4.18 Service Test 174 - Dispenser Water Actuator (Bottom Mount units only).
This test is used to test the dispenser actuator in Bottom Mount units. When selected, the refrigerator
display will show “Off” when the actuator is not activated. When the actuator is pressed, the
refrigerator display will show “On”. A service technician should evaluate proper operation of the
actuator.
ACTUATOR IS NOT ACTIVE
ACTUATOR IS ACTIVE
8.1.4.19 Service Test 175 - Dispenser Line Test.
This test is used to test the dispenser feedback input. When selected, the refrigerator display will
show “Off”. When the actuator or Sports Fill keypad are pressed, the refrigerator display should
change to “On”.
When the display shows “On”, it means that the main control board has received a DISP signal. This
test is used to further troubleshoot dispensing problems. This test should follow tests in any of the
previous dispenser tests.
ACTUATOR/FRONT FILL IS NOT ACTIVE