Fischer Panda 15 mini PMS Digital, Руководство пользователя

Страница: 54 / 162

Installation Instructions
Seite/Page 54 - Kapitel/Chapter 6: Installation Instructions 12.8.20
6.2.3 Advice for optimal sound insulation
Fig. 6.2.3-1: Generator base
The convenient base consists of a stable framework, on
which the generator is fastened by means of shock-
mounts. Since the aggregate is „free“ downwards, the
combustion air can be sucked in unhindered. In addition
the vibrations are void which would arise with a closed
capsule base.
6.3 Generator Connections
Sample for the connection at the Fischer Panda generator. See the description of the generator for the original loca-
tion.
All electrical wires are connected within the capsule tightly to the motor and the generator. This is also the case for
fuel lines and cooling water lines.
The electrical connections MUST be carried out according to the respective valid regulations. This also
concerns used cable materials. The cable supplied is meant for laying „protected“ (i.e. in pipe) at a
temperature up to a max of. 70 °C (160 °F). The on-board circuit must also be fitted with all essential fuses.
ATTENTION! Before working (installation) on the System read the
section „Safety Instructions“ in this manual.
Fig. 6.3-1:
Connection at the Generator - sample
1
2
3 4
5
6
7
8 9
10
11
1. Raw water intake
2. Fuel intake from tank to generator
3. Fuel return from generator to tank
4. Electrical line for fuel pump
5. Engine oil drain hose
6. Electrical line for remote control panel 7. Electrical cable for AC control box (VCS-control)
8. Electrical cable for AC control box (230V und 400V)
9. Generator AC-output
10. Generator starter battery negative cable (-)
11. Generator starter battery positive cable (+)
Example - see section 5.2 for detailed information