Fidelity Electronics C-10 Series, Руководство по эксплуатации

Страница: 77 / 95

77
Command Definition
Command Format
Parameter Description
Start
String
Command Code
(Note A)
Parameter
&
End String
Set Unit weight before Power Off * ST F035 ;d1# 0 = Off, 1 = On
Set Customer Code and Description * ST CCDE ;d1;d2#
d1 =1~18-digit Customer Code. Blank = nothing
d2 = 1~30 Customer Code Description. Blank = nothing
Set Product Code and Description * ST PCDE ;d1;d2#
 d1 =1~18-digit Product Code. Blank = nothing
 d2 = 1~30 Product Code Description. Blank =
nothing
Set Weight Check Limits * S1 or S2 CHKW ;d1;d2#
 d1= Lo limit. Maximum 6 digit plus decimal (if any).
 d2 = Hi limit. Maximum 6 digit plus decimal (if any).
Set Quantity Check Limits * S1 or S2 CHKQ ;d1;d2#
 d1= Lo limit. Maximum 6 digit. Decimal not
accepted. Blank = nothing
 d2 = Hi limit. Maximum 6 digit. Decimal not
accepted. Blank = nothing
Set Pre-set Tare Value (Note B) * S1 or S2 PSTA ;d1# Maximum 6 digit plus decimal (if any).
Set @WT * ST AVGW ;d1# Maximum 6 digit plus decimal (if any). Blank = 0
Set Expiry Duration * ST EXPY ;d1# 4 digits. 0000 = today, 9999 = 9999 days plus today
Note A : -
•
S1 = command to set parameter for P1.
•
S2 = command to set parameter for P2.
•
ST = command to set parameter for PA.
Note B
: - If old preset tare value already exists in memory, 2 command
strings are necessary: -
a.
1
st
command string to clear this old preset tare value first.
b.
2 nd command string to set new preset tare value.