Fidelity Electronics C-10 Series, Руководство по эксплуатации

Страница: 32 / 95

32
9.11 Expiry Date
This instrument supports expiry date output. Once expiry duration (in term of number of day) is entered in
internal function F36, instrument will convert the duration entered into expiry date. Expiry date can be recalled
for other purposes.
9.12 Print a Customer & Product Code Entered
6
Once a customer/product code is entered, it will be printed through the assigned comport.
9.13 Inputting Numbers, Letters, Symbols by Keyboard
This instruction supports numbers, letters and some select symbols entries. To enable this, set F30 to Yes .
Refer to markings on the numeric keys of instrument keyboard for number, letters and symbols assigned to
each key.
Default setting for letter entry is upper case, to change to lower case letter, press
[Check] . Lower case indicator
appears to denote lower case letter entry is in effect.
Cursor location of current entry is indicated by flashing decimal sign at its right side.
10. Piece Count
Before count transaction / process: -
1.
Remove all loads from weighing platform.
2.
If zero weight cannot be obtained when unloaded, press [Zero] . After [Zero] is pressed, the Zero
Indicator will appear.
3.
If a container is needed, place it onto the platform and press [Tare] manually (in case auto tare is not
enabled).
10.1 Obtain Unit Weight
Unit weight is the basic of all piece count transaction / process. Unit weight can be created and obtained through
one of the below methods: -
a.
Direct unit weight entry method.
b.
Sampling method.
c.
Employ last unit weight when power on
d.
Recall from quick PLU.
10.1.1 Direct unit weight entry method
This method is used when unit weight is known. Procedures: -
1.
During normal operation status, enter the unit weight through numeric keys and press [@WT] .
2.
Unit weight entered is then displayed on LCD3
6
Print format Lab 1 does not support customer/product code.