Fidelity Electronics C-10 Series, Руководство по эксплуатации

Страница: 19 / 95

19
F6
System (F7~F36)
Initialization
** No YES
•
Press [PF/Set] to shift between No and YES and press [Print/M+] to confirm.
•
If YES is selected, press [1] when “ SURE? ” is displayed. Instrument shows Done when initialization is completed.
F7 Auto Power Off Setting Off 1 3 ** 5 10 20 Other
Notes: -
•
Off = Auto power off disabled.
•
1 ~ 20 = Auto power off after this idle time (minute).
•
Other = Set specific auto power off time.
•
Auto Power off time parameter 1 ~ 20 will be ignored when instrument is powered by power adaptor.
To enter a specific auto power off time: -
1.
select Other and press [Print/M+] ,
2.
Enter the specific power off time in the format of HH.MM.SS and press [Print/M+] to save.
Auto power off function will be disabled when an energized power adaptor is plugged in.
F8 Brightness
Brightness (01 ~ 99)
** Default = 60
Color Ratio (01 ~ 99)
** Default = 50
•
To change setting, enter value through numeric keys and press [Print/M+] .
•
Set brightness (bt) first, then set color ratio. Color ratio is used to generate the preferred yellow color.
When instrument is powered by built-in rechargeable battery, backlight will be turned to minimum when battery is low or when weight value
remains unchanged for 5 seconds.
F9 Enable Totalization of P1 & P2
** Off
(Disabled)
On
(Enabled)
Notes : -
•
Select On to enable results totalization of 2 platforms.
•
When F79 is set to Off , this function is always = Off and this internal function is not accessible.
F10 Filter Strength 1 2 3 4 ** 5 6 7 8 9
Press [MR] or [PF/Set] to select: -
a.
1 (strongest filter) for bad working environment where vibration, wind flow… etc. affect stable reading,
b.
5 for normal environment,
c.
9 (least filter) for very good working environment where wind and vibration have no effect to stable reading.