Fidelity Electronics C-10 Series, Руководство по эксплуатации

Страница: 27 / 95

27
Setting procedures
4
: -
1.
Go to F16 and press [Print/M+] .
2.
Name of the current UART # appears on LCD2 .
3.
Press [PF/Set] until the UART # (UART 0 ~ 3) appears on LCD2 and press [Print/M+] .
4.
Press [PF/Set] or [MR] until the preferred transmission type appears on LCD3 and press [Print/M+] to
set data communication types. 7 parameters are available: -
•
Off = Disabled.
•
Auto 1 = Auto print when weight is stable.
•
Auto 2 = The highest stable weight value (of a weighing process) will be printed when all loads are
removed (and gross weight returns to zero or minus).
•
Auto 3 = The last stable weight value (of a weighing process) will be printed when all loads are
removed (and gross weight returns to zero or minus).
•
Manual = Manual output by pressing [Print/M+] .
•
PC = Continuous or selected periodic output of real time result according to predefined format.
•
CMD = Command communication with computer and APP mode.
•
Scaner = Connect with a barcode scanner. (UART #0 and UART #2 only)
Notes: -
•
If PC or CMD or Barcode Scanner is set, refer to paragraph 8.2 for rest of the setting.
•
If Auto 1 ~ 3 or Manual is set, refer to paragraph 8.3 for rest setting.
5.
Repeat above steps 1 ~ 4 for all other UARTs.
8.2 Parameters Table for PC & Command & Scanner
Step
No.
Set Item Parameters PC CMD SCANER
1 Baud Rate
1200 ~ 921600 in 12 steps
Default = 115200
■ ■ ■
2 Parity
None / Odd / Even
Default = None
■ ■ ■
3 Data Length
7 / 8
Default = 8
■ ■ ■
4
Protocol Type
Note G
Protocol 0 ~ 9 & Custom
Default = Protocol 1
■ Completed Completed
5
Transmission
Interval
Note A
0 ~ 300 (second) in 10 steps
Default = 0
Completed
8.3 Parameters Table for Auto 1 ~ 3 & Manual
5
Step
No.
Set Item Parameters Auto 1 Auto 2 Auto 3 Manual
1 Baud Rate
1200 ~ 921600 in 12 steps
Default = 115200
■ ■ ■ ■
2 Parity
None / Odd / Even
Default = None
■ ■ ■ ■
3 Data Length
7 / 8
Default = 8
■ ■ ■ ■
4 Auto Off / On ■ ■ ■ ■
4
Auto 1 ~ 3 do not support PA.
5
Auto 1 ~ 3 do not support PA.