manualshive.com logo in svg

FIBARO FGR-223, Руководство по эксплуатации, Страница: 30 / 34

Поделиться
Скачать
FIBARO FGR-223 Скачать руководство пользователя страница 30

30

ADVAncED PARAMETERS

153. Set slats back to previous position

For Venetian blinds (parameter 151 set to 2) the parameter determines 

slats positioning in various situations. 
The parameter is irrelevant for other modes.

Available settings:

0

 – slats return to previously set position only in 

case of the main controller operation.

1

 – slats return to previously set position in case 

of the main controller operation, momentary 

switch operation, or when the limit switch is 

reached.

2

 – slats return to previously set position in 

case of the main controller operation, momen-

tary switch operation, when the limit switch is 

reached or after receiving the Switch Multilevel 

Stop control frame

Default setting: 

1

Parameter size:

1

 [byte]

154. Delay motor stop after reaching end switch

For blinds (parameter 151 set to 1, 2, 5 or 6) the parameter determines 

the time after which the motor will be stopped after end switch con-

tacts are closed. 
For gates (parameter 151 set to 3 or 4) the parameter determines time 

after which the gate will start closing automatically if S2 contacts are  

opened (if set to 0, gate will not close). 

Available settings:

0-600

 (0 - 60s) - time

Default setting: 

10 

(1s)

Parameter size:

2

 [bytes]

155. Motor operation detection

Power threshold to be interpreted as reaching a limit switch.

Available settings:

0

 - reaching a limit switch will not be detected

1-255

 (1-255W) - report interval

Default setting: 

10

(10W)

Parameter size:

2

 [bytes]

156. Time of up movement

This parameter determines the time needed for roller blinds to reach 

the top.
For modes with positioning value is set automatically during calibra-

tion, otherwise it must be set manually.

Available settings:

1-90000 

 (0.01 - 900.00s, every 0.01s) - move-

ment time

Default setting: 

6000

 (60s)

Parameter size:

4

 [bytes]

NOTE

If parameter 20 is set 

to 1 (toggle switch), 

change value of pa-

rameter 153 to 0 for 

slats to work properly.

i

Содержание FGR-223



































Отзывы:

Нет отзывов