Festo CPX-CMAX Скачать руководство пользователя

Страница: 12 / 98

Safety and requirements for product use

Festo – P.BE-CPX-CMAX-SYS-EN – en 2017-09b – English

1.2

Requirements for product use

Make this documentation available to the design engineer, installer and person responsible for

commissioning of the machine or system in which this product will be used.

Always comply with the specifications of the documentation. Also consider the documentation for

the other components and modules.

Take into consideration the legal regulations applicable for the location as well as:

–

regulations and standards

–

regulations of testing organisations and insurers

–

national specifications

1.2.1

Transport and storage conditions

Protect the product during transport and storage from excessive stress factors, such as:

–

mechanical loads

–

impermissible temperatures

–

moisture

–

aggressive atmospheres

Store and transport the product in its original packaging. The original packaging offers sufficient

protection from typical stresses.

1.2.2

Technical prerequisites

General conditions for the correct and safe use of the product, which must be observed at all times:

Comply with the connection and ambient conditions of the product and all connected components

specified in the technical data. Technical data of the product

Appendix A.1. The product can only

be operated in compliance with the relevant safety regulations if you comply with the limit values

and load limits.

Observe the notes and warnings in this documentation.

1.2.3

Qualification of the specialists (requirements for the personnel)

The product may only be placed in operation by a qualified electrotechnician who is familiar with:

–

Installation and operation of electrical control systems

–

the applicable regulations for operating safety-engineered systems

–

the applicable regulations for accident prevention and occupational safety and

–

the documentation for the product

1.2.4

Range of application and certifications

Test values, which the product must comply with and fulfil

Technical data in appendix A.1. Product-

relevant EC directives

Declaration of conformity.

For certificates and the declaration of conformity for this product

www.festo.com/sp.

Содержание CPX-CMAX



































































































Результаты поиска

Содержание CPX-CMAX

Отзывы:

Похожие инструкции для CPX-CMAX

Бренды по названию

Популярные бренды

Festo CPX-CMAX, Описание

Результаты поиска

Содержание CPX-CMAX

Отзывы:

Похожие инструкции для CPX-CMAX

Бренды по названию

Популярные бренды