Filtration Learning System
Commissioning
© Festo Didactic
696684
49
Siemens TP700 Comfort
For example, use a control console with Siemens TP700 Comfort.
Programming software: Siemens STEP7 version 14 (SP1) or higher
1.
Connect the PC and HMI with the network cable
2.
Switch on the power supply
3.
Start the TIA-Portal development environment
4.
In the de-archived project (see above), select the corresponding sub-project of the station “tpBottling”.
5.
Load the project into the operator unit. Help can be found at
11.5.5
Starting the sequence
1.
Check the power supply and compressed air supply.
2.
Empty/Fill the station as described in “
chapter 11.2 Filling and emptying
”.
3.
Select the automatic operating mode with/without downstream station.
4.
Select a recipe in the process type.
5.
Press the Start button.
6.
The station starts the sequence.
Notes
• The sequence can be stopped at any time by pressing the emergency stop button or
the STOP button.
