Ferno Venice Basic Скачать руководство пользователя страница 29

Страница: 29 / 58

Venice Power evacuation chair - Venice Clack locking system

Important

The battery capacity may be affected by the storage

conditions if the chair is to be stored for an extended

period at temperatures below -17°C or above 66°C.

8.10 Battery

The chair is equipped with a Milwaukee

28 VDC Lithium-ion

battery. The design adopted means the battery is protected from

dirt, body fluids, rain, etc.

Use only Milwaukee

batteries and chargers approved by Ferno.

To request additional batteries and chargers, see Chapter 4

Accessories

, page 13.

BATTERY

●

Lithium-ion batteries have no memory effect. It is not

necessary to fully discharge the battery before recharging.

●

Charging time approx. 1 hour. The charging time varies

according to the charging frequency, the discharge level,

and age of the battery. If the battery is fully discharged,

the charging time will be longer.

●

The range of operating temperatures recommended by the

Manufacturer for the battery is between -10°C and +49°C.

Battery capacity may be affected if it is stored for a long

period at temperatures below -17°C or above 66°C.

●

Dispose of the battery when it reaches the end of its working

life. Do not dispose of the battery with household waste.

BATTERY USAGE

●

The slots on the battery are compatible with those of the

charger, and with those on the chair. See sections 8.11

Inserting and removing the battery

, page 30, and 8.13

Battery charger

, page 32.

●

Press the two red buttons to remove the battery from the

chair or the battery charger.

●

To check the battery charge status, press the appropriate

button on the battery. Consult subsection

Battery charge

indicators

, page 30.

●

ONLY store the battery in a cool, dry environment. DO

NOT store in an environment where the temperature

exceeds 50°C.

●

If you have two batteries, always keep the spare battery

charged and ready for use.

WARNING

Incorrect charging of the chair may cause damage

and / or injury. Use only batteries approved and

authorised by Ferno, and recharge only with

chargers approved and authorised by Ferno.

Insertion slot

Buttons (2)

Important

For longer battery life, always switch off the chair when it

is not in use.
Lithium-ion batteries have no memory effect. It is not

necessary to fully discharge the battery before recharging.

Battery

Содержание Venice Basic



























































Результаты поиска

Содержание Venice Basic

Отзывы:

Похожие инструкции для Venice Basic

Бренды по названию

Популярные бренды

Ferno Venice Basic, Руководство пользователя и по обслуживанию

Результаты поиска

Содержание Venice Basic

Отзывы:

Похожие инструкции для Venice Basic

Бренды по названию

Популярные бренды