Ferno Venice Basic Скачать руководство пользователя

Страница: 39 / 58

Venice evacuation chair - Venice Clack locking system

10 - MAINTENANCE

10.2 Disinfecting the device

DISINFECTING THE NON-MOTORISED DEVICE

(VENICE BASIC AND VENICE PLUS)

1. Remove restraints and any other accessory from the

product.
2. Disinfect all equipment (including accessories such as

cushions, restraints, etc.) with a cloth or sponge dampened

with disinfectant solution, let it sit for 10-20 minutes; use

brushes to rub and clean the least accessible parts;
3. Use a cloth to rinse and dry the treated surfaces, make

sure that all the device's components are completely dry

before using them;

4. After cleaning, be sure to refit on the device the restraints

and/or any other accessory that was removed.

10.1 Routine and preventive maintenance

The chair is a medical device requiring regular maintenance,

hence you are recommended to comply with the following

schedule:
1. ROUTINE maintenance: Ferno recommends carrying

out routine maintenance operations once a year. Ferno

engineers will issue a conformity certificate of the medical

device after maintenance.

2. PREVENTIVE maintenance: preventive maintenance

operations are to be carried out by the user, as specified in

the table.

If the chair undergoes particularly heavy use, maintenance

should preferably be carried out on a more frequent basis. If

there are signs of wear and damage, discontinue use of the

chair and immediately contact Ferno's Technical Support

Service.
Ferno directly carries out repair maintenance operations,

without the need of dealers, mechanics or external service

centres.
You are thus invited to be wary of those who present

themselves as Ferno's authorised technician. We suggest

you to directly contact our SOS service using the reference

contacts specified on page 2.

Important

Disinfectants and detergents containing phenols (if

above the threshold of 2500 ppm), chlorine-based

(bleach) or iodine-based solutions can cause damage.

Do not use products containing these chemicals.

Important

When not in use, store the device in an indoor

environment that is dry and protected from direct

sunlight.

Important

DO NOT WASH WITH HIGH PRESSURE

WATER

Do not use high pressure water to clean the

device.

Important

After disinfection / cleaning, ensure that the device

and its components are completely dry before use.

Disinfection
Cleaning
Inspection
Lubrication

- At least every 6 months

Voltage adjustment

- At least every 6 months

At every use

Every month

When needed

Minimum preventive

maintenance intervals

Содержание Venice Basic



























































Результаты поиска

Содержание Venice Basic

Отзывы:

Похожие инструкции для Venice Basic

Бренды по названию

Популярные бренды

Ferno Venice Basic, Руководство пользователя и по обслуживанию

Результаты поиска

Содержание Venice Basic

Отзывы:

Похожие инструкции для Venice Basic

Бренды по названию

Популярные бренды