Ferno Venice Basic Скачать руководство пользователя

Страница: 25 / 58

Venice Power evacuation chair - Venice Clack locking system

Control unit

Motorised system

Track carriage

8.2 Motorised system

The motorised system includes the motor, the battery, and the

track drive system. Do not open the motor housing. Only Ferno's

authorised and trained technicians can open and work on the motor

housing.

●

CONTROL UNIT:

The control unit is mounted on the

extendible carrying handle. It allows the operator to control

the speed and movement of the tracks, to monitor the battery

charge level and other functions of the chair.

●

CONTROLS:

The controls are positioned on the unit and

are easily accessible and identifiable using the corresponding

symbols to enable correct usage by the operator. The pressure

with which buttons are pressed determines the speed of the

chair, allowing the operator to control it during the way up

or down the stairs.

●

POWER BUTTON:

The power button is located on the

motor housing and allows to switch the chair on and off (see

section 8.4

Power button

, page 27).

●

LIGHTS BUTTON:

The Lights Button is located on the

control unit and allows to switch the lights on and off (see

section 8.7,

Lights button

, page 28).

●

BRAKE FUNCTION:

The brake function is automatically

activated when the chair is switched on. It blocks track

movement when the up and down controls are not pressed.

Refer to section 8.6

Brake button

, page 28.

●

SPEED LIMITER:

The chair is fitted with an internal

speed limiter. If the system loses power and the tracks turn

freely, this system reduces the speed of the chair on the way

down the stairs.

Refer to section 8.8

SSL Limiter

, page 28.

●

MAIN BATTERY:

Rechargeable 28V lithium-ion battery,

mounted on the motor housing. The battery can be easily

removed using the appropriate buttons, and re-inserted into

its compartment. Refer to section 8.10

Battery

, page 29.

●

MOTOR:

The motor is located at the rear of the chair and

it controls the tracks' movement. The motor receives inputs

from the control unit to adjust the speed and movement

(direction) of tracks.

●

TRACKS:

The tracks allow the device to ascend and

descend stairs. They are driven by the motor. The operator

controls the speed and movement (direction) of the tracks

using the controls.

●

ANTENNA:

Mounted on the motor housing. It maintains

the wireless connection between the motor and the control

unit.

Power button

Motor housing

Green power light

Main battery

Rear Light

WARNING

DO NOT OPEN THE ELECTRICAL HOUSINGS OR

REMOVE SAFETY COMPONENTS.

There are no user serviceable parts inside. Contact

Ferno s.r.l. for Technical Assistance.

Содержание Venice Basic



























































Результаты поиска

Содержание Venice Basic

Отзывы:

Похожие инструкции для Venice Basic

Бренды по названию

Популярные бренды

Ferno Venice Basic, Руководство пользователя и по обслуживанию

Результаты поиска

Содержание Venice Basic

Отзывы:

Похожие инструкции для Venice Basic

Бренды по названию

Популярные бренды