Ferno Venice Basic Скачать руководство пользователя

Страница: 28 / 58

Venice Power evacuation chair - Venice Clack locking system

8.6 Brake Button

The brake function prevents track movement when the

controls are not pressed. By default, the brake function is

always active, as shown by the stop symbol that lights up on

the control panel.
The operator can enable or disable this safety feature through
the appropriate button on the control unit

• BRAKE FUNCTION ENABLED:

STOP icon lights

up on controller.

• BRAKE FUNCTION DISABLED:

icon lights up on

controller.

During the way up and / or down the stairs, when the operator

releases one of the up or down controls, the brake function

helps hold the chair in position, thus greatly reducing the

effort needed to keep the device still.
It is recommended to leave the brake function always

activated in order to ensure safe transport of the patient.
Pay the utmost attention and control the chair when going

down the stairs if the motor is not running or the brake

function is disabled.

8.7 Lights button

The Lights button switches the lights fitted on the motor

on and off; the lights improve safety, illuminating the

surroundings in which the chair is being used.
Press the button to switch on the lights; press again to switch

them off.

8.9 Selecting movement speed

The chair has two speeds for going up and down the stairs.
To select the desired speed, proceed as follows:
1.  Make sure that the chair is switched on.
2.  Press the speed selection button.
3.  Select the desired speed: either HARE or TORTOISE,

by means of the specific button. When the speed has

been selected, the related icon will light up.

8.8 Speed Limiter SSL

The SSL function ("

Safety Speed Limiter

”) trips

automatically when the chair exceeds a predetermined safe

speed limit on the way down the stairs. This ensures safely

controlled descent during patient transport.
It also guarantees safe operation of the chair even when

the battery is low or damaged, or the circuit board is not

working properly. In these two cases, contact the Technical

Support Service immediately (page 2). In case of a low

battery, recharge the battery immediately.

Brake

Button

Lights

button

Speed

button

Содержание Venice Basic



























































Результаты поиска

Содержание Venice Basic

Отзывы:

Похожие инструкции для Venice Basic

Бренды по названию

Популярные бренды

Ferno Venice Basic, Руководство пользователя и по обслуживанию

Результаты поиска

Содержание Venice Basic

Отзывы:

Похожие инструкции для Venice Basic

Бренды по названию

Популярные бренды