Ferno Venice Basic Скачать руководство пользователя

Страница: 24 / 58

Venice Power evacuation chair - Venice Clack locking system

8 - VENICE POWER CONFIGURATION

8.1 Initial setup

Before using the VENICE POWER chair:

●

Apply the restraints.

●

Inspect the chair (see section 10.6

Venice Power

inspection

, page 42).

●

Use the charger supplied as standard to charge the main

battery

Refer to section 8.11

Inserting and removing

the battery

, page 30.

●

Insert two "AA" batteries in the control unit.

●

The "AA" batteries (

supplied as standard

) can be found

in a handy bag along with the auxiliary connection

cable (see section 4.2

Standard components for Venice

Power

, page 14).

●

Ensure the tracks are working properly. If necessary,

adjust the tension. Refer to section 10.8

Adjusting the

tension of the tracks

, page 44.

●

If the batteries are fully charged but the UP / DOWN

controls do not work, it is possible that the wireless

connection is not working properly. Refer to section 10.10

Auxiliary connection cable,

page 46.

WARNING

The use of the chair with a track carriage that is not properly locked

may cause damage and / or injury. Ensure you have properly locked

the track carriage before moving the patient.
Lubricating the track carriage can cause damage and / or injury to

the patient and / or operators. Never lubricate the track carriage.
Ensure that both tracks and adjustable handle are closed when the

patient seats on the VENICE POWER. If they are open, close them

before seating the patient.
Incorrect charging of the chair may cause damage and / or injury. Use

only batteries approved and authorised by Ferno, and recharge only

with chargers approved and authorised by Ferno.
Do not leave the VENICE POWERTRAXX chair unattended on surfaces

with a gradient over 10°. There is a risk of tipping.
Take extra care when using the VENICE POWERTRAXX chair on

carpeted stairs, as there may be a risk of pulling the carpet from the

steps and causing harm to operators and / or the patient. Ensure the

carpet is secure. Allow use of the chair only by trained and qualified

personnel.
In case of stairs with steps with rounded profiles, take the utmost

care when using the chair. Allow use of the chair only by trained and

qualified personnel.
When going up or down a spiral staircase, take the utmost care and

allow use of the chair only by trained and qualified personnel.
Never switch off the brake button. The brake function ensures safe

transportation for both the patient and for the operators. Pay the

utmost attention and ensure you have full control of the chair while

going up and down stairs, regardless of whether the brake function

is active or has been disabled by the operator.

Содержание Venice Basic



























































Результаты поиска

Содержание Venice Basic

Отзывы:

Похожие инструкции для Venice Basic

Бренды по названию

Популярные бренды

Ferno Venice Basic, Руководство пользователя и по обслуживанию

Результаты поиска

Содержание Venice Basic

Отзывы:

Похожие инструкции для Venice Basic

Бренды по названию

Популярные бренды