Ferno Venice Basic Скачать руководство пользователя страница 7

Страница: 7 / 58

Venice evacuation chair - Venice Clack locking system

3 - THE DEVICE

3.1 Description

The Ferno VENICE evacuation chair (hereinafter simply

referred to as "chair") is a device for transporting a

seated patient up and down stairs and over flat surfaces.

The chair can be configured with a set of accessories and

is compatible with both manual and motorized tracks.

This system is powered by a rechargeable 28 VDC battery

(supplied as standard). The operator can control the chair by

means of an easily accessible and identifiable control unit.

The control unit is mounted on the extendible carrying handle.

The chair should be used by duly trained operators only. The

chair is for professional use by at least 2 qualified operators.

Additional help may be required

to handle heavy patients and/or when the situation demands it,

and should always be provided according to local healthcare

regulations. A third operator may be required depending on

local regulations. Additional assistance may be required to

handle heavy patients and/or when the situation demands it,

and should always be provided according to local healthcare

regulations.

COMPONENTS SUPPLIED WITH THE DEVICE

●

Front telescopic handles adjustable in 5 positions

●

Rear closable handles

●

Rear wheels of 200 mm - length 30 mm

●

Front wheels of 150 mm - length 30 mm

●

Patient restraint system

●

User's manual

Read the user manual

carefully

The device requires at least

two qualified operators for

correct use.

2- OPERATOR TRAINING AND SKILLS

WARNING

Improper use of the device may cause damage and /

or injury. Use the device as described in this manual.

2.1 Skills

Operators who use the device must:

●

have specific experience in patient handling and

transport procedures;

●

possess the appropriate skills to assist the patient;

●

record the training sessions on the form on page 55.

2.2 Training

Operators are required to:

●

read and understand all information in this manual.

●

attend a suitable training course on the use of the

device.

●

practice with the device before using it in real

situations with patients.

●

log the training sessions.

Important

Ferno s.r.l. is not liable for damages caused to users

and/or third parties arising from improper use of the

device, or if the Venice evacuation chair is used with a

device not approved by Ferno s.r.l..

WARNING

Any configuration unauthorised by Ferno s.r.l. could

cause damage and/or serious injury.

If used in a different configuration, contact the

Technical Service team at Ferno s.r.l. directly. (see

page 2).

3.2 CE Compliance

MEDICAL DEVICES DIRECTIVE

Ferno's products meet the requirements of

European Directive 93/42/EEC concerning

medical devices.
For more information: www.ferno.it

Label showing how to close the track carriage

Содержание Venice Basic



























































Результаты поиска

Содержание Venice Basic

Отзывы:

Ferno Venice Basic, Руководство пользователя и по обслуживанию, Страница: 7 / 58

Результаты поиска

Содержание Venice Basic

Отзывы: