Ferno Venice Basic Скачать руководство пользователя

Страница: 4 / 58

Venice evacuation chair - Venice Clack locking system

1 - SAFETY INFORMATION

1.1 Warning

The danger symbols draw attention to potentially dangerous

situations that, if disregarded, may result in accidents,

damage and/or injury.

WARNING

Untrained users may injure themselves, cause damage and/or

physical harm. Allow only trained and qualified staff to use the

device.
Improper use of the device may cause damage and / or injury. Use the

device as described in this manual.
Occasional assistants may cause damage and/or physical harm, or

injure themselves. Always keep the device under control, activate the

controls, and coordinate the assistants.
An unassisted patient is at risk of injury. Never leave the patient

alone, and always assist the patient when using the device.
Failure to use the restraints can cause the patient to fall and endanger

their safety. Always use restraints to secure the patient to the device.
Improper maintenance may cause serious accidents, injuries and/or

damage. Perform maintenance as instructed in this user manual.
The use of improper and/or unauthorised devices may cause

accidents, damage, and/or injury. Use only devices that have been

approved and authorised by Ferno s.r.l..
Unauthorised modifications can cause injury and / or damage. Use

the device only as approved by Ferno.

Unauthorised repairs, and repairs carried out by people not

approved by Ferno s.r.l., will render all warranties null and void and

may compromise the safety of the device.

Non-original spare parts and inadequate repairs may cause damage

and/or injury. Use only original Ferno parts and refer exclusively to

Ferno s.r.l. Customer Support.

1.2 Important

Boxes labelled "Important" contain important

information on use and/or maintenance of the device.

Important

1.4 Load capacity

Observe the load capacity of the Venice device. Refer to

section 3.6

General specifications

, page 11.

1.3 Blood-borne diseases

To reduce the risk of exposure to infectious diseases that

may be transmitted by blood, such as HIV-1 or Hepatitis,

follow the instructions on disinfection and cleaning in this

manual carefully.

1.6 Disposal

CORRECT DISPOSAL OF THE BATTERIES

The batteries should be disposed of

properly at the end of their life-cycle. Do

not dispose of the batteries with household

waste. For proper disposal, contact the

appropriate authority.
The chair has a main rechargeable

lithium ion battery to power the motorised system, and two

non-rechargeable "AA" batteries for the control unit.

WEEE DIRECTIVE (EU)

Directive 2002/96/EC of the European Parliament and

Council on waste electrical and electronic equipment

(WEEE) restricts electrical and electronic equipment waste.

For proper disposal, contact the appropriate authority.

Li-ion

1.5 Compatibility with locking systems

The VENICE POWERTRAXX chair is designed to be used

with the Ferno VENICE CLACK locking system for storage.

Any other configuration is not compatible with the

specifications and instructions contained in this manual.

Ferno s.r.l. is not liable for damages caused to users or

third parties arising from improper use of the VENICE

POWERTRAXX chair.

Содержание Venice Basic



























































Результаты поиска

Содержание Venice Basic

Отзывы:

Похожие инструкции для Venice Basic

Бренды по названию

Популярные бренды

Ferno Venice Basic, Руководство пользователя и по обслуживанию

Результаты поиска

Содержание Venice Basic

Отзывы:

Похожие инструкции для Venice Basic

Бренды по названию

Популярные бренды