Ferno Venice Basic Скачать руководство пользователя

Страница: 13 / 58

Venice evacuation chair - Venice Clack locking system

FOOT/LEG REST
Use as footrest

Loosen the nut and turn the rest towards the ground. Once

the desired position is achieved, tighten the nut until the

footrest is stable.

Use as leg rest

Loosen the nut and turn the rest upwards. Once the desired

position is achieved, tighten the nut until the footrest is

stable. Use the button on the final part to adjust its length, it

can be extended as required.

Foot / leg rest

4.1 Venice accessories (optional)

The Venice chair can be configured with a set of accessories,

as well as with the manual track (Venice Plus) and the
motorised track (Venice Power).

ADJUSTABLE ARMRESTS

In order to raise or lower the armrests, bring them to the

desired position.
To widen the armrest: Activate the locking system by raising

the armrest and keeping it parallel to the ground, then widen

it up to the maximum extension. Make sure the armrest is

locked.
To narrow the armrest: Activate the locking system by

raising the armrest and keeping it parallel to the ground,

then take it back to the original position. Make sure the

armrest is locked (Figure 1 and 2).

Figure 1

Figure 2

4 - ACCESSORIES

Ferno offers several approved accessories for the Venice

chair. Always follow the directions in this instruction manual.
For more product information, contact Ferno Customer

Service (page 2).

WARNING

The use of improper and/or unauthorised devices

may cause accidents, damage, and/or injury.

Use only devices that have been approved and

authorised by Ferno s.r.l..

Содержание Venice Basic



























































Результаты поиска

Содержание Venice Basic

Отзывы:

Похожие инструкции для Venice Basic

Бренды по названию

Популярные бренды

Ferno Venice Basic, Руководство пользователя и по обслуживанию

Результаты поиска

Содержание Venice Basic

Отзывы:

Похожие инструкции для Venice Basic

Бренды по названию

Популярные бренды