Ferno Venice Basic Скачать руководство пользователя страница 2

Страница: 2 / 58

Venice evacuation chair - Venice Clack locking system

USER AND MAINTENANCE MANUAL

To request additional free copies of the

instruction manual, please contact Ferno

s.r.l.'s Customer Service.

Ferno Technical Support

Customer Service and Technical Support are important aspects of

every Ferno product. Before contacting us, note the serial number

of the product and specify it in all written communications. For all

queries concerning technical support, contact Ferno s.r.l.:
Telephone (toll-free in Italy)

800.501.711

Fax

+39 0516861508

E-mail [email protected]

Ferno Customer Service

For assistance and further information, contact Ferno s.r.l.'s

Customer Services:

MANUFACTURER

Ferno s.r.l., Via Benedetto Zallone 26

40066 - Pieve di Cento (BO) - ITALY

Telephone (toll-free in Italy)

800.501.711

Phone

+39 0516860028

Fax

+39 0516861508

Website www.ferno.it

Limitation of liability

This manual contains general instructions on the use and

maintenance of the product. The instructions do not cover all

possible applications and operations. The user is solely responsible

for proper and safe use of the product. The safety information is

provided as a service to the user and ensures only the minimum

required level of safety to prevent injury to operators and patients.

Any other safety measure implemented by the user must comply

with applicable regulations. Before using the product, it is strongly

recommended that staff be trained in its correct usage. Retain

this manual for future reference. In case of change of ownership,

ensure that the manual remains with the product. Additional free

copies can be obtained from Ferno s.r.l.'s Customer Service.

Intellectual property declaration

The information in this manual is the property of Ferno s.r.l. - Via

Benedetto Zallone 26, 40066 Pieve di Cento (Bologna) Italy.

All patent rights, design rights, construction, reproduction, use and

sale relating to any item covered in this manual are the confidential

and exclusive property of Ferno s.r.l., except for rights expressly

transferred to third parties or not attributable to parties owned by

the supplier. It is prohibited to reproduce this manual, either in full

or in part, without the prior consent of Ferno s.r.l.

Limited warranty

Ferno products are covered by a 24-month warranty against

manufacturing defects. For the full terms and conditions of

warranty and liability, see Chapter 13

Warranty

, page 54.

Содержание Venice Basic



























































Результаты поиска

Содержание Venice Basic

Отзывы:

Похожие инструкции для Venice Basic

Бренды по названию

Популярные бренды

Ferno Venice Basic, Руководство пользователя и по обслуживанию

Результаты поиска

Содержание Venice Basic

Отзывы:

Похожие инструкции для Venice Basic

Бренды по названию

Популярные бренды