74
Ferm
IMPACT DRILL
THE NUMBERS IN THE FOLLOWING TEXT
CORRESPOND WITH THE PICTURES AT PAGE 2
TECHNICAL SPECIFICATIONS
PRODUCT INFORMATION
Fig.A
1 Drill dept limiter
2 Chuck
3 Mechanical speed control
4 Switch for normal and percussion drilling
5 Side handle
6 Left/right switch
7 On/off switch with speed control
8 Switch lock
PACKAGE CONTENTS
The package contains:
1 Impact
drill
1 Depth
gauge
1 Side handle
1 Instruction
manual
1 Safety
instructions
1 Warranty
card
Check the machine, loose parts and accessories for
transport damage.
SAFETY INSTRUCTIONS
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Denotes risk of electric shock.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
1. Keep work area clean
Cluttered areas and benches invite injuries.
2. Consider work area environment
Don’t expose power tools to rain. Don’t use power
tools in damp or wet locations. Keep work area well
lit. Don’t use power tools in presence of flammable
liquids or gases.
3. Guard against electric shock
Prevent body contact with grounded surfaces (e.g.
pipes, radiators, ranges refrigerators).
4. Keep children away
Do not let visitors contact tool or extension cord.
All visitors should be kept away from work area.
5. Store idle tools
When not is use, tools should be stored in dry, high,
or locked-up place, out of reach of children.
6. Don’t force tool
It will do the job better and safer at the rate for which
it was intended.
7. Use right tool
Don’t force small tools or attachments to do the job
of heavy duty tool. Don’t use tools for purposes not
intended:for exam-ple, don’t use a circular saw for
cutting tree limbs or logs.
8. Dress properly
Do not wear loose clothing or jewelry. They can be
caught in moving parts. Rubber gloves and nonskid
footwear are recommended when working
outdoors. Wear protective hair covering to contain
long hair.
9. Use safety glasses
Also use face or dust mask if cutting operation is
dusty.
10.Don’t abuse cord
Never carry tool by cord or yank it to disconnect it
from receptacle. Keep cord from heat, oil and sharp
edges.
11.Secure work
Use clamps or a vise to hold work. It’s safer than
using your hand and it frees both hands to operate
tool.
12.Don’t overreach
Keep proper footing and balance at all times.
Voltage
| 230 V
Frequency
| 50 Hz
Power input
| 850 W
No load speed/min
| 0-900/0-2700
Impact rate
| 0-14400/min
| 0-43200/min
Max. drill diameter (Wood)
| 25 mm
Max. drill diameter (Concrete) | 13 mm
Max. drill diameter (Steel)
| 10 mm
Weight
| 2.75 kg
Lpa (sound pressure)
| 92.9 dB(A)
Lwa (sound power)
| 105.9 dB(A)
Vibration value
| 10.236 m/s
2
Ferm
3
,
:
1. !" #!$%&
•
.
Ferm.
2. !$'# ( (# (!.
• ! " .
.
• # .
.
!.
• ! .
Ferm .
)
"# $
$$ !
.
$ Ferm % &
. '
"
.
*$#+&
( %
& ,
. (
% "
.
) ,
.
%,
, .. !
.
!#
$ .
,-"&
) ..
",
Ferm.
*
, %
" .
/,)
,
. $
& .
&
.
+
Ferm. ),
.
!
".
-& ,
/
.
EN50144-1, EN50144-2-1, EN55014-1,
EN55014-2, EN61000-3-2, EN61000-3-3
.
98/37/E
73/23/E
89/336/E
04-05-2004
ZWOLLE NL
W. Kamphof
$
CE
ı
,*
(GR)
