OBID
®
classic-pro
Manual
ID CPR30.xx
FEIG ELECTRONIC GmbH
Page 110 of 126
H01114-0e-ID-B.docx
*
If a MB89R118 Transponder is detected in reader field, the corresponding Fast Custom Specific Commands
can be used by the Reader. This depends on the settings of the Customer Command Option Bytes (see:
Feh-
ler! Verweisquelle konnte nicht gefunden werden.
)
.
In details:
Used Command
Executed Fast Command, if enabled
[0x23] Read Multiple Blocks (max. 2 Blocks)
[0xC3] Fast Read Multiple Blocks (max. 2 Blocks)
[0x24] Write Multiple Blocks (max. 2 Blocks)
[0xC4] Fast Write Multiple Blocks (max. 2 Blocks)
[0xA1] Write EAS
[0xD1] Fast Write EAS
[0xA5] Read Multiple Blocks Unlimited
[0xD5] Fast Read Multiple Blocks Unlimited
Command
Number of Blocks
Single CMD
Multiple CMD
(max. 2 Blocks)
Multiple Unlimited
CMD
Read
N = 1
-
-
N = 2
-
-
N > 2
-
-
Write
N = 1
-
-
N = 2
-
-
N > 2
-
-
Lock
N = 1
-
-
N = 2
-
-
N > 2
-
-
Used Commands depends on the number of blocks
**
The WR-OPTION will be set automatically by the FEIG Readers if the RW-OPTION parameter
” is set to “00: automatically set”. Up to two blocks
of data
can be written for one request.