OBID
®
classic-pro
Manual
ID CPR30.xx
FEIG ELECTRONIC GmbH
Page 99 of 126
H01114-0e-ID-B.docx
7.3. [0xBE] T=1 Data Exchange
This command is to exchange APDU (Application Protocol Data Unit) command and response pairs
with the smartcard by using the T=1 protocol.
Before performing this command the T=1 protocol has to be selected and the smartcard has to acti-
vated by using the SAM Activate / Deactivate command (see 7.1. [0x01] SAM Activate / Deactivate).
REQUEST-DATA
6
7
(8...n-2)
[0xBE]
MODE
(REQ_DATA)
RESPONSE-DATA
6
(7...n-2)
STATUS
1
(RSP_DATA)
MODE:
Bit:
7
6
5
4
3
2
1
0
Function
0
0
0
0
0
0
0
0
REQ_DATA:
The REQ_DATA Field could be used to transfer T=1 APDU and has to build by the optional
NAD, PCB, LEN, INF Field of the communication protocol.
In most cases the INF Field carries an APDU to the smartcard.
The EDC field is build internally by the reader
RSP_DATA:
Response to the T1 block from the card (if any).
The EDC field is not included in RSP_DATA.
1
