IDENTIFICATION
ID ISC.ANT1710/690 Crystal
Gate Excellence -A/-B
Installation Gate People
Counter
Page 57 of 57
10
Install Radar module with split
rivet.
Use installation hole that radar
module surface faces
between the antennas.
11
The sensitivity of the radar module
will be set auto- matically by the
GPC after power up the gate
system
To check/set the sensitivity see also 8.3.2 Configuration and Test in ISO Host
Mode or Buffered Read Mode, Step 8.
12
Connect LED cable with X1 of
LED controller and fix it with the
cable clips.
Connect the LED cable with X3 of
GPC
13
Close antenna with antenna cover
with display window
After the installation you have to
stick the adhesive label of the
GPC below the type plate of the
antenna.
14
The detection of the 2.and 3. GPC
