IDENTIFICATION
ID ISC.ANT1710/690 Crystal
Gate Excellence -A/-B
Typical Antenna Configuration
Page 30 of 30
Fig. 19:Connection of the components in an antenna Type A
The cable from antenna type B to the antenna type A should preferably be connected shortly. Unused cable
lengths should be tied in antenna Type B. Tie all cables as far away from the antenna conductor as possible.
The cables must never touch the antenna conductor. It is possible to place the power supply in the foot of
the antenna Type B. The ferrite cores must be placed after installing the cables 10cm at the cable end of the
cable in antenna type A with 3 turns at each cable.
