IDENTIFICATION
ID ISC.ANT1710/690 Crystal
Gate Excellence -A/-B
Typical Antenna Configuration
Page 28 of 28
Here you find a possible wire connection between antenna Type A and B:
At a single gate with 2 antennas, a connection must be installed between X13 GPC-out of the terminal board
in Antenna Type A and X13 GPC-out of the terminal board in Antenna Type B. The side with the ferrite core
must be placed in the antenna Type B.
Fig. 17:Connection of the antennas at single gate
Possible configuration for a double gate with 3 antennas:
X13 GPC-out of the terminal board in Antenna Type A and X13 GPC-out at the 1st Antenna Type B and X13
GPC-out of the terminal board in Antenna Type A und X13 GPC-out at the 2nd Antenna Type B must be
installed. The sides with the ferrite core must be placed in the antenna Type B
Fig. 18:Connection of the antenna at double gate
ANT1710690-B
ANT1710690-A
LED-light
1. People Counter
Antenna No.1
ANT1710690-A
LED-light
1. People Counter
LED-light
Antenna No.2
ANT1710690-B
Antenna No.3
ANT1710690-B