IDENTIFICATION
ID ISC.ANT1710/690 Crystal
Gate Excellence -A/-B
Transportation Instruction
Page 9 of 9
3 Instruction on Transportation and Shipping of the Antenna
Transportation Instruction
The packaging of the antennas has been designed to transport antennas vertically standing on a pallet to the
site of installation.
NOTE:
The antenna must be transported vertically on the base side of the pallet. Transport or storage in the
wrong orientation can cause damage to the antenna.
In case a vertically positioned transport is not possible, the antenna can be transported lying on the narrow
side. A transporting lying on the flat side of the packaging can cause damage to the device.
The pallet has to be adapted to the size and the number of antennas. In no case shall the packaging stand
out of the range. An additional protection of the edges of the pallet is recommended.
The packaging must never become wet. When transporting overseas by ship or plane, the packaging must
be protected from moisture at all times.
Temperatures above or below the specified temperature range may damage the antenna.
Any mechanical stress on the packaging is not permitted. Any stacking of the packaging may cause damage
to the packaging below.
Even after the unpacking of the antenna the face of the antenna plate must always be transported and
stored vertically. Horizontal transport of an antenna may deform the antenna plate.
