IDENTIFICATION
ID ISC.ANT1710/690 Crystal
Gate Excellence -A/-B
Typical Antenna Configuration
Page 42 of 42
The following may result in faulty read results:
•
the antenna is installed improperly (check orientation, antenna distance, cabling)
•
metal near the antennas is detuning or interfering with them.
•
the antennas are not properly tuned.
•
the noise level is too high (Vmax – Vmin
≥
20 mV)
•
the transponder is too insensitive, detuned or defective
•
the reader is improperly configured (transmitting power, transponder type, modulation, transponder
parameters, etc.).
•
a cable is defective or has a weak contact.
•
reader, multiplexer or antenna are defective.
