FAW Jilin Automobile Xenia S80 Скачать руководство пользователя страница 78

Страница: 78 / 262

5-2

Warning light

The warning light may indicate the exceptions

occurring in relevant systems.

Danger



To shut down the engine or park your

automobile in contingency situations, drive your

automobile to a safe roadside position. Shut

down the engine and turn on the warning lights.



To check any components inside the engine

compartment, do wait till the engine gets cool

so as to avoid heat injury.



Keep your hands, clothes and other objects

away from the running parts and components

inside the engine compartment for fear of severe

personal injuries.

Check all warning lights

1. Pull up the parking brake handle.

2. Set the ignition switch to the “ON” position, but

do not start up the engine. Here, all warning

lights shall be on.

ABS(antilock brake system) warning lights may

in several seconds.

Air bag warning light may go out in 6 seconds.

3. When the engine is started up and the parking

brake handle is put down, all warning lights

shall go out.

If any warning light fails to work, contact the

local special service store as soon as possible for

inspections.

Brake warning lights

When the engine is running, the brake warning lights may

go on if the parking brake handle is pulled up or the brake

fluid level drops below the “MIN” (minimum) graduation

line marked on the brake fluid reservoir.

If necessary, add brake fluid and check for brake fluid

leak.

If the warning lights go on, higher braking force shall be

applied to the braking system, and the braking length may

be increased.

Brake warning lights may also indicate the exceptions

of E. B. D. (electronic braking force distribution).

When E. B. D. control develops a fault, the brake warning

lights go on.

Содержание Xenia S80







































































































































































































































































Результаты поиска

Содержание Xenia S80

Отзывы:

Похожие инструкции для Xenia S80

Бренды по названию

Популярные бренды

FAW Jilin Automobile Xenia S80, Руководство пользователя

Результаты поиска

Содержание Xenia S80

Отзывы:

Похожие инструкции для Xenia S80

Бренды по названию

Популярные бренды