FAW Jilin Automobile Xenia S80 Скачать руководство пользователя страница 229

Страница: 229 / 262

14-17

Inspection of automatic transmission oil level

When transmission oil temperature is 70-80

℃

, check

the oil level. If your automobile has run for 15

minutes at 60km/hr or 30 minutes at 40km/hr, oil

temperature may change to approximately 70 - 80

℃

1. Park your automobile on a horizontal surface,

and pull up the parking brake handle.

2. Allow the engine to idle, and depress the brake

pedal securely in the meantime. Smoothly move
the gear change hand lever from gear P to gear

L, and then move it back to gear P.

3. Pull out and wipe up the oil dipstick, and insert it.

4. Pull out the oil dipstick to check whether or

not the oil level falls within the “hot” range.

5. If the oil level is too low, add specified liquid

oil through filler pipe slowly. Never add oil

excessively.

For recommended automatic transmission oils,

see Section 15.

6. Insert the oil dipstick till the bottom.

Wipe up the spilled liquid oil.

Warning



If liquid oil gets dirty, replace liquid oil at the

local special service store.



If the oil level too low or fuel volume is

reduced considerably, contact the local special

service store for inspection of the system.

Danger



Both the liquid oil and its peripheral zone are

quite hot; therefore, be careful not to scald

yourself.



Never touch or come close to the moving parts

and components while the engine is running,

so as to avoid severe personal injuries.

Attention



The oil levels measured when liquid oil is

cool (20

℃

–30

℃

) may be used as reference

values only.

Check again whether or not the oil level is

correct at normal working temperature

(70

℃

―80

℃



If the oil levels indicated on the front side

and back side of the oil dipstick are different,

the lower among them shall prevail.

Hot cold

Содержание Xenia S80







































































































































































































































































Результаты поиска

Содержание Xenia S80

Отзывы:

Похожие инструкции для Xenia S80

Бренды по названию

Популярные бренды

FAW Jilin Automobile Xenia S80, Руководство пользователя

Результаты поиска

Содержание Xenia S80

Отзывы:

Похожие инструкции для Xenia S80

Бренды по названию

Популярные бренды