FAW Jilin Automobile Xenia S80 Скачать руководство пользователя страница 39

Страница: 39 / 262

3-5

Third-row seat

Flap-seat backrest

Folding handle

1. Pull up the folding handle, incline the backrest

slowly, and release the folding handle.

Handle

2. To retract the seat, pull up the handle, and lift up

the seat.

Set back the third-row seat

1. Lift up the seat legs.

2. Lift up the seat backwards.

3. Lift up the backrest.

Danger

2. In order to reduce danger and personal injury in

case an accident takes place:

● Never allow anybody to seat inside the boot

compartment. The boot compartment is not

designed for passengers.

● The height of articles piled inside the boot

compartment shall not exceed that of the

backrest.

● Please verify that the third-row seat is set back

to its vertical position and securely locked up.

Содержание Xenia S80







































































































































































































































































Результаты поиска

Содержание Xenia S80

Отзывы:

Похожие инструкции для Xenia S80

Бренды по названию

Популярные бренды

FAW Jilin Automobile Xenia S80, Руководство пользователя

Результаты поиска

Содержание Xenia S80

Отзывы:

Похожие инструкции для Xenia S80

Бренды по названию

Популярные бренды