FAW Jilin Automobile Xenia S80 Скачать руководство пользователя страница 67

Страница: 67 / 262

4-3

High beam

Headlight flasher

Turn on/off high beam

When the headlights are turned on, push outward

the lever to turn on the high beam, or pull it back to

return to lower beam. When high beam headlights

are turned on, the indicator light goes on.

Allow the headlights to flicker

Pull the lever gently and then release it.

The headlight flasher may work when the

headlights are turned on/off.

Turn signal light control

Change

a lane

When the ignition switch is set to its “ON” position,

the turn signal lights flicker.

Toggle the combination switch to indicate steering.

Here, indicator lights on the dashboard may start

flickering.

Or toggle gently the combination switch and keep

in any position (either upper or lower) to indicates

lane changing.

Attention

If the flickering rate is higher than that in normal

condition, bulb of the indicator light may be

damaged.

Emergency warning signal switch

Push the switch to allow all turn signal lights to

flicker.

Here, indicator lights on the dashboard may start

flickering.

Push it once again to turn off the switch.

The direction indicator switch does not work when

the emergency warning signal switch is turned on.

Do not operate the switch except for emergency.

Danger

Drive your automobile away from the lane to avoid

accident if any emergency occurs.

Содержание Xenia S80







































































































































































































































































Результаты поиска

Содержание Xenia S80

Отзывы:

Похожие инструкции для Xenia S80

Бренды по названию

Популярные бренды

FAW Jilin Automobile Xenia S80, Руководство пользователя

Результаты поиска

Содержание Xenia S80

Отзывы:

Похожие инструкции для Xenia S80

Бренды по названию

Популярные бренды