Fastrax IV, Инструкция по эксплуатации, Страница: 70 / 92

64
NOTE: The ceiling tile cannot be thicker than 0.9inch (2.4cm).
A. Remove the ceiling tile from the ceiling. Draw a circle whose diameter is 184mm on the
tile (You can use the carton with a hole). Cut the circle out of the ceiling tile.
B. To install the dome camera, fasten the dome mounting base to the base bracket
(Figure 2, 2) using 3 screws which are included in accessories.
C. Insert the flush mount into the ceiling and turn the lever clamp (Figure 2, 4) to fasten the
flush mount to the ceiling.
D. Join the dome camera to the dome mounting base.
E. Fix the trim ring (Figure 2, 1) to the flush mount.
NOTE: To increase the safety, screw safety ring
string to the guide bracket and something
which can prevent falling incidently.
EXPLODED ASSEMBLY PARTS LIST
Item PART NAME Q'ty DESCRIPTION
1 TRIM RING 1 PLASTIC
2 BASE BRACKET 1 STEEL (EGI 1.6T)
3 GUIDE BRACKET 3 STEEL (EGI 2.0T)
4 LEVER CLAMP 3 AI
5 DOME RING 1 STEEL (EGI 1.6T)
6 SCREW 6 SELF TAPPING M4x12
7 SCREW 3 M4 x 55
8 SCREW 1 M4 x 6
9 E-RING 3 Ø 4
10 SFLF TAPPING(2) SCREW 3 M4 x 12
ACCESSORY
Item PART NAME Q'ty
1 SAFETY RING STRING 1
2 SELF TAPPING(2) SCREW M4x12 2
3 SELF TAPPING(1) SCREW M4x12 1