Fastrax IV, Инструкция по эксплуатации, Страница: 34 / 92

28
7. Repeat Step 2 through 5 for each desired position. Each title will be displayed on top of
the line.
8. To edit the title, follow the procedure of the auto scan above to edit titles
9. Select Save and Exit and push the Joystick to the right. Press ESC to exit the program
without saving.
You can expand the Tour sequence by calling other programmed tours.
Note : The speed applies in the vector mode only.
Note : In the Tour mode, in conjunction with preset and Auto Scan, you can make the camera
travel from a preset position to another preset position at a specific speed.
Example: Preset 001>002>003>004>005>006, Auto Scan 01 starts at preset 002, ends at
preset 003, Auto Scan 02 starts at preset 005, ends at preset 006; Tour 001, 002, A01, 004,
A02.
1
Î
2 2~3
Î
4
Î
5~6, repeat
where
Î
: Quick move, ~ : Programmed speed
To change the dwell time of the preset in the tour:
Use the Joystick to move the cursor to a stored preset position. By pressing PRST key, the
camera will move to the stored Preset view and the cursor moves to the dwell time field. After
changing the dwell time, press PRST key and the cursor moves to the preset number.
To assign the functions other than preset in the tour when the function key is not existed:
Use the Joystick to move the cursor to a stored preset position. Pressing CTRL key or
IRIS OPEN key will change the preset number to other function (auto scan, pattern, tour,
preset) with the first programmed number. To change the number, twist the joystick or press
Tele or Wide key.
3.8 Pattern
(Shortcut: PTRN)
The Pattern feature records user control of the selected dome camera. Up to four 8 patterns
can be stored and played back by pressing No.+ PTRN keys subsequently.