Fastrax IV, Инструкция по эксплуатации, Страница: 21 / 92

15
3.5 Preset
(Shortcut: PRST)
If you need to view specific places routinely, you should program presets. A preset is a
programmed video scene with automatic pan, tilt, zoom, focus, and AE settings. Once
programmed, placing the number position and pressing a PRST button on your controller
calls up that preset automatically. In addition, presets may be assigned to alarm actions or
as the “home” position for the dome camera. As many as 240 presets, whose positions are
saved in the dome’s firmware, may be programmed.
Number : 001 -240,
Title
: up to 12 characters.
Dwell Time : Set the dwell time at the both end, 01 – 99 seconds
Focus
: Auto, Manual, One Push
Auto : Auto Focus at continuous.
Manual : Camera goes into manual mode
One Push : Held the auto focus at one times only with a pan/tilt/zoom action occurred.
Preset Position : Set the preset position with view direction and lens control..
Event Function : Set the desired function.
Auto Exposure : Set the auto exposure of the desired preset..
Preset List : Show the stored preset list.
Follow steps below to store the Preset positions:
1. Press the PRST key to enter the preset menu directly. Or press the MENU key to display
the main menu on the monitor. Scroll to preset and push the Joystick to the right.
2. Select the “Number” and select the preset position to be stored by pushing the Joystick
up, down, right, or left.
3. Follow the procedure of the auto scan above to edit titles.
4. If selected preset number is not empty, “Already exist preset” message will be displayed
on the monitor and select the “OK” and push the Joystick to the right to overwrite.