Fastrax IV, Инструкция по эксплуатации, Страница: 31 / 92

25
- Environments where there is strong direct/indirect light shining onto the object or
Background
- The abandoned object is not fixed.
3.5.7 Removal
This can detect a object removed in a specified area.
You can see current status of moving object by “Bounding Box”.
Once moving object is fixed as “Removal”, color of “Bounding box” will be changed to
complementary color of ROI line.
(“Bounding box” means you can see a virtual rectangle on moving object. In prior of this, you
make sure that you set “On” in display and Bounding box in OSD Setup.
Min. : Set the min size of object while object removed.
Max. : Set the max size of object while object removed.
Event Time : Set the event time.
Set Point : Set the area for removal.
Clear : Remove the area.
Follow steps below to set the Removal:
1. Set the min size of the enter object and set the max size.
2. Select the event time.
3. Select the “Set Point”, then draw a box for two point.
4. Select the Exit (with saving) and push the Joystick to the right. Press ESC to exit the
program without saving.
Note : There might be malfunction of Removal for the following cases.
- The object brightness is almost identical to the background luminance
- When the objects are either large or small in comparison to the preconfigured
Object size
- Environments where there is strong direct/indirect light shining onto the object or
Background