Farmet FALCON 3 Скачать руководство пользователя

Страница: 69 / 102

Seed coulters

Description of the seed coulters

The seed is sown with the coulters.

The coulter discs (2) cut through the seedbed and expose the seed grove.

The seed is stored between the discs (2).

The pressure wheel (5) guides the seed coulter and closes the groove.

The harrow (6) covers the sowing row with soil and levels the soil.

The coulter is stored in maintenance-free rubber bearings.

Coulter discs

The discs are located at the front, are V-shaped for each other for low tensile strength and the
formation of a groove for seed placement.

Disk adjustment

In case of wear the seed discs, it is necessary to adjust the
distance between the discs by changing the location of the
spacers.

All 4 spacers (1) must always be used on each coulter. If all 4
spacers (1) are not used

–

the coulter will be damaged.

The discs must be slightly pretensioned on the blade.
However, it must be possible to turn them easily.

When rotating one disc, the other must be rotated reliable.

If the discs stop or lock due to incorrect preload, the seed will
start to aggregate.

Seed coulter frame

Pressure wheel scraper

Coulter discs

Pressure wheel

Comb of the wheel

Harrow

Содержание FALCON 3







































































































Результаты поиска

Содержание FALCON 3

Отзывы:

Похожие инструкции для FALCON 3

Бренды по названию

Популярные бренды

Farmet FALCON 3, Руководство по эксплуатации

Результаты поиска

Содержание FALCON 3

Отзывы:

Похожие инструкции для FALCON 3

Бренды по названию

Популярные бренды