Farmet FALCON 3, Руководство по эксплуатации

Страница: 77 / 102

76
22 Machine geometry
- This setting is used to define the geometry of the machine relative to the tractor. It is also possible to
set the advance and delay of the engine start (sowing).
1. Turn off the application
2.
Note on the point 5: If the section is behind the axle axis, the value must always be negative (sowing section), if
the section is in front of the axle, the value must be positive (fertilization section).
The button is used to move to the setting of arm 2,3 and connection 1 .
Use the back button to return from the geometry settings .
.
1 Setting of the hopper 1 (motor 1) 4 Advance engine shutdown 1
2 Working width of the hopper 1 (motor 1) 5 Distance from the axle axis to the seed outlet
3 Engine start time 1 6 Distance from the drawbar pin to the axle axis
1 3
2
4
5
6
Touch
Basic