FangLing F2100B/T, Руководство по эксплуатации и установке

Страница: 88 / 147

Chapter 10 Code Explanation
79
Chapter 10 Code Explanation
10.1 Code Symbol and Interpretation

In the cutting machine programming, the following programming symbols are
generally available, with corresponding parameter following it.
Table 10.1 Programming symbols interpretation
programming
symbols
Function interpretation
N Programming segment number
G Code for ready
M Auxiliary function
X Relative coordinate or absolute coordinate of X axle
Y Relative coordinate or absolute coordinate of Y axle
U Relative coordinate of X axle
V Relative coordinate of Y axle
I
Coordinate d-value of X axle between circle center and
arc’s start
J
Coordinate d-value of Y axle between circle center and
arc’s start
R
Arc’s radius, when it’s positive value, the arc <180°;
when it’s negative value, the arc >180°
F Cutting rate, used for G01, G02, G03

In the following context, all the symbol “/” is the relationship of OR. For example,
X/U represents that the result is either X or U, both of which cannot simultaneously be.
N represents parameter value, for example, Xn expresses that n is the following
parameter. [] means optional context, which can be selected or not.
10.2 Coordinate System
This system uses right-hand Descartes coordinate system acquiescently, as the figure
10.1 shows.