FangLing F2100B/T, Руководство по эксплуатации и установке

Страница: 66 / 147

Chapter 7 Parameter Setting
57
F1 Common F4 Powder F2 Flame F8 Save
Marker Ignition Time 0.00 s
Marker Preheat Time 0.00 s
Mix powder Open Time 0.00 s
Mix powder Close Time 0.00 s
Marker Up Time 0.00 s
Marker Down Time 0.00 s
Marker Horizontal Offset 0.000 mm
Marker Vertical Offset 0.000 mm
F3 Plasma F5 System F7 Export F6 Import
Fig 7.5 powder parameters

Marker Ignition Time
：
Input ≥0 arbitrary value, unit: s.

Marker Preheat Time
：
Input ≥0 arbitrary value, unit: s.

Mix powder Open/Close Time
：
Delay time of scatter powder mouth relative to spurt
powder mouth open/close, input ≥0 arbitrary value, unit: s.

Marker Up Time
：
The time of powder torch going up. Unit: s.

Marker Down Time
：
The time of powder torch going down. Unit: s.

Marker Horizontal Offset
：
Horizontal offset of powder gun relative to cutting torch.
Unit: mm.

Marker Vertical Offset
：
Vertical offset of powder gun relative to cutting torch. Unit:
mm.
7.5 System Parameters
The system parameters, as shown in Fig 7.6, are related with the precision of driver
shaft of the cutting machine, coordinate axis, increase/decrease of rate and little arc
processing limited parameter.