Chapter 1 F2000 Series Control System Introduction
4
1.2 Characteristics of System
1)
Chinese/English/French/Portuguese/Russian/Denmark/Korean language menu,
the menu can be switched only by one key.
2)
47 categories different graphics (including grid pattern), chip part and hole part
are alternative.
3)
Support the EIA code (G code) and various FastCAM
、
FreeNest
、
SmartNest
、
IBE
software.
4)
Compact keyboard design and easy to input files.
5)
Graphics have some operations such as Proportion, Rotate, and Mirror.
6)
Graphics can be arrayed in matrix, interaction, stacked modes.
7)
Steel plate can be adjusted according any steel side.
8)
Coordinate system can be customized to support the two dimensional coordinates
of all eight kinds.
9)
All input and output port type and the number can be customized (normally open
or normally closed).
10) Self-diagnostic function, to diagnose the key status and all the IO status, facilitate
inspection and debug.
11) Provide a front USB interface for copying files.
12) System can be upgraded by USB interface easily, and we provide lifetime
upgrade service.
13) All functions and techniques can upgrade online and don’t worry about the after
sale service.
14) Import and export files by single or all files.
15) Display time, week and clock.
16) Parameters backup and online upgrade.
17) Support the Flame, Plasma, Dusting draw and Demonstration four kinds of mode.
18) Including various types of processing parameters to meet the needs of different
processes.
19) Flame and Plasma are separated in the control IO ports.
20) Support THC, two-level preheat, three-level pierce in flame mode.
21) Plasma arc feedback, positioning feedback, automatically shut down the arc at the
corner.
22) Built-in plasma arc auto/manual turn high function: display actual arc pressure and
set arc pressure, set THC parameter, check for collision/position successful signal,
Содержание F2100B/T
Страница 146: ...Contact Information 137...
