FTP9000 Series Programmable DC Power Supply Operation Manual
____________________________________________________________________________
- 6 -
1. General Description
1.1 Overview
FTP9000 series high-power programmable DC power supply has the characteristics of high power density, high
power factor, high efficiency, and wide range of output. Its wide range voltage / current output and automatic
constant power function can greatly increase the application coverage. FTP9000 series DC power supply output
power 5kW up to 180kW in a single unit, and expandable up to 1800kW when paralleling 10 identical models. Its
voltage output up to 2250V, current up to 6120A.
For bench top applications, this series provides an intuitive user interface with full keypad and rotary knob. System
integrators benefit from the standard USB (virtual SERIAL) and LAN interfaces supporting both SCPI commands
and ModBus RTU protocol. Free application software, programming manual and a complete set of development
DLLs are available to reduce programming time and increase productivity. The application software allows users
to control the power supply, execute test sequences, or log measurements.
1.2 Main features
■
Output voltages: 80 V up to 2250 V;
■
Output current: 20 A up to 6120 A;
■
Output power: 5 kW up to 180 kW, expandable up to 1800 kW;
■
CV, CC, CP operation modes;
■
Easy Master-Slave parallel;
■
Precision V & I measurement;
■
High speed programming;
■
Programmable sequence;
■
Voltage & current slew rate control;
■
CV / CC priority;
■
Voltage ramp function;
■
Wide operating region for output;
■
Internal resistance simulating;
■
Remote sense compensation;
■
Optional analog programming & monitoring interface;
■
±OVP, ±OCP, ±OPP, OTP, ±LVP;
■
Voltage / current / power limit;
■
Standard LAN, USB (serial), optional RS485, GPIB or CAN ports;
■
SCPI and ModBus RTU protocol;
